Editing The Wwn Nickname - HPE XP7 User Manual

3. On the Monitored WWNs tab click Add New Monitored WWNs to open the Add New
Monitored WWNs window.
4. Specify the information for each WWN, as listed in the following table.
Item
HBA WWN (required)
WWN Name (optional)
Port (in Available Ports)
5. Click Add. The added WWN is displayed in Selected WWNs.
6. If you need to remove a WWN from the Selected WWNs list, select the WWN and click
Remove.
7. When you are done adding WWNs, click Finish.
8. In the Confirm window click Apply to apply the settings to the storage system.
Related topics
"Add New Monitored WWNs wizard" (page 189)

Editing the WWN nickname

Prerequisites
Required role: Storage Administrator (Performance Management)
Procedure
1. Open the Performance Monitor window.
In Command View Advanced Edition:
1. On the Resources tab, expand the Storage Systems tree.
2. Right-click the target storage system, and then select Performance Monitor.
In Remote Web Console:
1. Select Analytics in Explorer, and select Performance Monitor in the tree to open the
Performance Monitor window.
2. Click the Monitored WWNs tab to see the list of WWNs being monitored.
3. Select the WWN to edit. You can edit only one WWN at a time. If you select multiple WWNs,
an error will occur.
4. On the Monitored WWNs tab click Edit WWN to open the Edit WWN window.
5. On the Edit WWN window edit the HBA WWN and WWN Name fields as needed:
HBA WWN
A 16-digit hexadecimal number. The value of HBA WWN must be unique in the storage
system.
WWN Name
The nickname distinguishes the host bus adapter from other adapters. The WWN Name
must be less than 64 digits and must consist of alphanumeric characters and at least
one symbol.
18 Performance Monitor operations
Description
Enter the 16-digit hexadecimal number.
Enter the unique name to distinguish the host bus adapter from other
adapters. The WWN Name must be less than 64 characters and must
consist of alphanumeric characters and at least one symbol.
In the Available Ports list select the port connected to the WWN. Ports
connected to mainframe hosts are not displayed, because they are not
supported for Performance Monitor.