HPE XP7 User Manual page 57

Target = 16, Total = 16
+----+----+----+----+----+----+----+----+----+----+
...........................!
.................................
End gathering port data
It might take time after Loading ExportTool is displayed in the command prompt and before
Export tool start [Version 80-xx-xx/xx] is displayed. The time elapsed between the two
messages varies depending on the communication environment of the computer and SVP. The
following table shows the approximate time period.
Communication speed between a computer and SVP
1 Gbps
100 Mbps
By default, the system compresses monitoring data files into a ZIP-format archive file. When you
want to view the monitoring data, you can decompress and extract the CSV files from the ZIP
archive. If the operating system on your computer does not include a way to extract files from a
ZIP archive, you must obtain software to view the data.
When Export Tool is running, if an internal error listed in the Errors in the Export Tool table
occurs, an exclamation mark (!) appears, and then Export Tool tries to export again. By default,
Export Tool retries three times.
If export processing does not end after three retries, or an internal error that is not listed in the
table occurs, no retries are performed. In this case, close the command prompt, and then run
Export Tool again.
Note that the maximum number of retries can be changed by the retry subcommand. For details
about the retry subcommand, see
When Export Tool processing is completed, the directories and files created by Export Tool are
deleted automatically. If Export processing stops abnormally, the following directories and files
are not deleted:
export/lib/SVP-value
JSanExport.jar
JSanRmiApiEx.jar
JSanRmiApiSx.jar
JSanRmiServerEx.jar
JSanRmiServerSx.jar
JSanRmiServerUx.jar
To delete the above directories and files, run a batch file. If your computer runs Windows, run
delWin.bat. If your computer runs UNIX, use delUnix.bat.
CAUTION: Do not run delWin.bat or delUnix.bat while obtaining monitoring data by
running Export Tool.
NOTE: If you change the svpip value in command.txt before running delWin.bat or
delUnix.bat, the directories and files created by Export Tool are not deleted. In this case,
delete them manually in the lib directory.
NOTE: You can change the default method of exporting files to an uncompressed format.
However, the resulting files could be significantly larger and take longer to compile. For more
information, see "option" (page
For a complete list of files to be saved by Export Tool, see
Line usage rate (%)
0.1
0.5
0.2
1
"retry" (page 62).
79).
Approximate time
1 minute
12 seconds
5 minutes
1 minute
"Using Export Tool" (page
Using Export Tool
51).
57