Multi Set Dialog Box - HPE XP7 User Manual

Item

Multi Set dialog box

Use this dialog box to select multiple LDEVs with data that you want to place into Cache Residency
cache. The items shown on the Multi Set dialog box reflect the options selected on the Cache
Residency window. Only volumes belonging to the selected CLPR are shown.
Item
Number of Available Cache
Residency Areas
Available Cache Residency Size
Cache Residency Mode
Prestaging Mode
Range
LDKC
CU
LDEV
240 Cache Residency GUI reference
Description
This button is unavailable when Cache Residency operations to set data into
cache have been requested. To enable the Release, either perform the requested
set operations, or cancel the requested set operations.
Description
Number of Cache Residency cache areas that can be created.
Size of unused Cache Residency caches.
Cache Residency mode (priority or bind) specified by the Cache Residency
Mode option on the Cache Residency window.
Prestaging mode (yes or no) specified by the Prestaging Mode option on the
Cache Residency window.
Range of data to be placed into Cache Residency cache. The data range is
specified using the Start and End fields on the Cache Residency window. All is
displayed if the Select All Area box was checked.
Selects the LDKC that contains the desired CU and LDEVs.
Selects the CU image that contains the desired LDEVs. Only CUs owned by
the selected CLPR are displayed in the Multi Set dialog box.
LDEVs in the selected CU image that are available for the Multi Set function.
The LDEV table shows only those volumes that are both owned by the CLPR
and are selected from the CLPR list in the Cache Residency window.
For detail of items, see "Multi Set LDEV table" (page 241)).