Port Tab Of The Performance Control Main Window - HPE XP7 User Manual

Item
Open PFC Dialog

Port tab of the Performance Control main window

Use this tab to set the limit on the performance of non-prioritized ports and set the threshold on
the performance of prioritized ports.
Item
Current Control
Status
228 Performance Control GUI reference
Description
From and To are unavailable if Performance Control is in View mode or the monitoring
data (that is, usage statistics) is not stored in the storage system.
Click Performance Control to open the Performance Control main window.
Description
Shows the current control status of the system.
Port Control indicates the system is controlled by the upper limits and threshold specified
on the Port tab.
WWN Control indicates the system is controlled by the upper limits and threshold specified
on the WWN tab.
No Control indicates the system performance is not controlled by Performance Control.
Tip: If WWN Control is displayed when the Port tab is active, click Apply to switch control so
that Port Control is displayed.