HPE XP7 User Manual page 68

id]][...]|internal|virtual]|
internal|virtual]|
Port [[port-name]:[port-name]][...]|
MFPort [[port-name]:[port-name]][...]|
PortWWN [port-name]:[port-name]][...]|
LU[[port-name.host-group-id]:[port-name.host-group-id]][...]|
PPCGWWN[[monitor-target-name:monitor-target-name]][...]|
RemoteCopy|
RCLU [[port-name.host-group-id]:[port-name.host-group-id]][...]|
RCLDEV[[LDKC-CU-id]:[LDKC-CU-id]][...]|
UniversalReplicator |
URJNL[[JNL-group-id]:[JNL-group-id]][...]|
URLU [[port-name.host-group-id]:[port-name.host-group-id]][...]|
URLDEVr[[LDKC-CU-id]:[LDKC-CU-id]][...]|
PhyMPPK
}
Operands
Operand
PhyPG
[ S h o r t | L o n g ] [ [ p a r i t y - g r o u p - i d ] : [ p a r i t y - g r o u p - i d ] ] [ ... ]
PhyLDEV
[ S h o r t | L o n g ] [ [ p a r i t y - g r o u p - i d ] : [ p a r i t y - g r o u p - i d ] ] [ ... ]
PhyExG
[[exg-id]:[exg-id]][...]
68 Exporting Performance Monitor data
Description
Use this operand to export statistics about parity group usage rates, which are displayed in
the Monitor Performance window. When statistics are exported to a ZIP file, the file name will
be PhyPG_dat.ZIP. For details on the statistics exported by this operand, see
(page 85).
You can use the Short or Long option to select the storing period of the monitoring data to
be exported. If you specify Short, the exported file will contain statistics in a short range for
up to 15 days. If you specify Long, the exported file will contain statistics in a long range for
up to six months (for example, up to 186 days). If neither Short nor Long is specified, statistics
in both the short and long range are exported.
When you specify variable parity-group-id, you can narrow the range of parity groups
whose monitoring data are to be exported. parity-group-id is a parity group ID. The colon
(:) indicates a range. For example, 1-1:1-5 indicates parity groups from 1-1 to 1-5.
Ensure that the parity-group-id value on the left of the colon is smaller than the
parity-group-id value on the right of the colon. For example, you can specify
PhyPG 1-1:1-5, but you cannot specify PhyPG 1-5:1-1. Also, you can specify
PhyPG 1-5:2-1, but you cannot specify PhyPG 2-1:1-5.
If parity-group-id is not specified, the monitoring data of all parity groups will be exported.
Use this operand when you want to export statistics about volume usage rates, which are
displayed in the Monitor Performance window. When statistics are exported to a ZIP file, the
file name will be PhyLDEV_dat.ZIP. For details on the statistics exported by this operand,
see Table 5 (page 85).
You can use the Short or Long option to select the storing period of the monitoring data to
be exported. If you specify Short, the exported file will contain statistics in short range for up
to 15 days. If you specify Long, the exported file will contain statistics in long range for up to
six months (for example, up to 186 days). If neither Short nor Long is specified, statistics in
both the short and long range are exported.
When you specify variable parity-group-id, you can narrow the range of parity groups
whose monitoring data are to be exported. parity-group-id is a parity group ID. The colon
(:) indicates a range. For example, 1-1:1-5 indicates parity groups from 1-1 to 1-5.
Ensure that the parity-group-id value on the left of the colon is smaller than the
parity-group-id value on the right of the colon. For example, you can specify
PhyLDEV 1-1:1-5, but you cannot specify PhyLDEV 1-5:1-1. Also, you can specify
PhyLDEV 1-5:2-1, but you cannot specify PhyLDEV 2-1:1-5.
If parity-group-id is not specified, the monitoring data of all volumes will be exported.
Use this operand when you want to export statistics about external volume groups, which are
displayed in the Monitor Performance window. When statistics are exported to a ZIP file, the
Table 5