HPE XP7 User Manual page 71

Operand Description
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the LDKC-CU-id
value on the right of the colon. For example, you can specify LDEVEachOfCU 000:105, but
you cannot specify LDEVEachOfCU 105:000.
If internal is specified, you can export statistics about volumes in the parity group. If virtual is
specified, you can export statistics about volumes in the external volume or V-VOL.
If LDKC-CU-id, internal or virtual is not specified, the monitoring data of all volumes will be
exported. Either one of LDKC-CU-id, internal, or virtual can be specified.
Port Use this operand when you want to export port statistics, which are displayed in the Monitor
[ [ p o r t - n a m e ] : [ p o r t - n a m e ] ] [ ... ] Performance window. When statistics are exported in a ZIP file, the file name will be
Port_dat.ZIP. For details on the statistics exported by this operand, see
When you specify variable port-name, you can specify a range of ports for which data is
saved using the format port-name:port-name. For example, CL3-a:CL3-c indicates
ports from CL3-a to CL3-c.
Ensure that the port-name value on the left of the colon is smaller than the port-name
value on the right of the colon. The smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates which value is smaller than which
value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a < ... < CL4-r
For example, you can specify Port CL1-C:CL2-A, but you cannot specify
Port CL2-A:CL1-C. Also, you can specify Port CL3-a:CL3-c, but you cannot specify
Port CL3-c:CL3-a.
If port-name is not specified, the monitoring data of all ports will be exported.
MFPort Use this operand when you want to save monitoring data for mainframe fibre ports displayed
[ [ p o r t - n a m e ] : [ p o r t - n a m e ] ] [ ... ] on the Performance Monitor window. When statistics are exported to a ZIP file, the file name
is MF_Port_dat.ZIP. For details on the statistics exported by this operand, see
(page
When you specify variable port-name, you can narrow a range of ports for which data is
saved using the format port-name:port-name. For example, CL1-C.01:CL1-C.03
indicates the range from host group #01 of port CL1-C to host group #03 of port CL1-C.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon.
The smallest port-name value is CL1-A and the largest port-name value is CL4-r. The
following formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a < ...<CL4-r
For example, you can specify CL1-C:CL2-A, but you cannot specify CL2-A:CL1-C. Also, you
can specify CL3-a:CL3-c, but you cannot specify CL3-c:CL3-a. If port-name is not specified,
the monitoring data of all volumes is exported.
P o r t W W N [ [ p o r t - n a m e ] : [ p o r t - n a m e ] ] [ ... ] Use this operand when you want to export statistics about host bus adapters (WWNs) connected
to ports, which are displayed in the Monitor Performance window. When statistics are exported
in a ZIP file, the file name will be PortWWN_dat.ZIP. For details on the statistics exported
by this operand, see
When you specify variable port-name, you can narrow a range of ports for which data is
saved using the format port-name:port-name. For example, CL3-a:CL3-c indicates ports
from CL3-a to CL3-c.
Ensure that the port-name value on the left of the colon is smaller than the port-name
value on the right of the colon. The smallest port-name value is CL1-A and the largest
port-name value is CL4-r. The following formula illustrates which value is smaller than which
value:
CL1-A < CL1-B < ... < CL2-A < CL2-B < ... < CL3-a < CL3-b < ... < CL4-a < ... < CL4-r
For example, you can specify PortWWN CL1-C:CL2-A, but you cannot specify
PortWWN CL2-A:CL1-C. Also, you can specify PortWWN CL3-a:CL3-c, but you cannot
specify PortWWN CL3-c:CL3-a.
If port-name is not specified, the monitoring data of all host bus adapters will be exported.
91).
Table 9 (page 91).
Export Tool command reference
Table 9 (page 91).
Table 10
71