Connecting Wwns To Ports; Deleting Unused Wwns From Monitoring Targets - HPE XP7 User Manual

6. When you are done editing WWNs, click Finish.
7. In the Confirm window click Apply to apply the settings to the storage system.
Related topics
"Edit WWN wizard" (page 183)

Connecting WWNs to ports

Prerequisites
Required role: Storage Administrator (Performance Management)
Procedure
1. Open the Performance Monitor window.
In Command View Advanced Edition:
1. On the Resources tab, expand the Storage Systems tree.
2. Right-click the target storage system, and then select Performance Monitor.
In Remote Web Console:
1. Select Analytics in Explorer, and select Performance Monitor in the tree to open the
Performance Monitor window.
2. In the Performance Monitor window click the Monitored WWNs tab.
3. On the Monitored WWNs tab select the WWN to connect to the port.
Select only one WWN at a time. If you select multiple WWNs, an error occurs.
4. On the Monitored WWNs tab click Add to Ports to open the Add to Ports window.
5. Select the port to connect in Available Ports, and then click Add.
The selected WWN and port are added to the Selected WWNs list.
Mainframe ports are not displayed because they are not supported for Performance Monitor.
6. If you need to delete a WWN from the Selected WWNs list, select the WWN, and then click
Remove.
7. When you are done selecting the WWNs to connect, click Finish.
8. In the Confirm window click Apply to apply the settings to the storage system.
Related topics
"Add to Ports wizard" (page 192)

Deleting unused WWNs from monitoring targets

Prerequisites
Required role: Storage Administrator (Performance Management)
Procedure
To delete WWNs that are being monitored:
Monitoring WWNs 19