HPE XP7 User Manual page 152

confirmation dialog box. The requested operation appears in blue in the LDEV information
table.
To release additional LDEVs from Cache Residency cache:
1. Check the Multi Set / Release box, click Release, and then click OK on the confirmation
message.
2. In the Multi Release dialog box, select the desired LDKC and CU image, and select
the desired LDEVs to release from Cache Residency cache.
3. Click Release to return to the Cache Residency window. The requested Cache
Residency operations appear in blue in the LDEV information table.
6. Repeat steps (2) and (3) until all desired operations are listed.
NOTE:
7. Verify the Prestaging setting:
To enable prestaging, select Prestaging.
To disable prestaging, clear Prestaging.
8. To start the operations, click Apply:
If Prestaging was selected, respond to the Yes/No confirmation. To continue with
prestaging, click Yes. To continue without it, click No.
To cancel the operation, click Cancel and click OK on the confirmation.
9. Monitor the Cache Residency window to make sure that the operations complete
successfully. The cache information area shows the progress of the requested operations.
Related topics
"Cache Residency window" (page 236)
"Multi Release dialog box" (page 241)
152 Cache Residency operations
The Set is unavailable until you apply (or cancel) your requested operations.