Management Ip Configuration; Fibre Channel And Sas Host Nicknames - HPE MSA 1040 Technology White Paper

Table of Contents

Advertisement

Technical white paper
Appendix A
Before you power down the hosts and remove the existing MSA controllers, review this checklist and make sure you have all the necessary
information.

Management IP configuration

IP address
Netmask:
Gateway:
Controller Fibre Channel Worldwide Names
Controller A WWNs
Controller B WWNs

Fibre Channel and SAS host nicknames

WWN
________________________
________________________
________________________
________________________
Controller iSCSI port addresses
These addresses are listed under Host Interface in the SMU.
Controller A IP address:
Controller B IP address:
Port IQN host nicknames
You need this information for iSCSI host nicknames only.
Host ID
__________________________
__________________________
__________________________
__________________________
Controller A
______________________
______________________
______________________
A1:
_____________________
B1:
_____________________
Nickname
________________________
________________________
________________________
________________________
Port 1:
____________________
Port 1:
____________________
Nickname
__________________________
__________________________
__________________________
__________________________
Controller B
______________________
______________________
______________________
A1:
_____________________
B2:
_____________________
Profile
_______________________
_______________________
_______________________
_______________________
Port 2:
_____________________
Port 2:
_____________________
Page 33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msa 2040Msa 2042

Table of Contents