Deleting An Hba From A Pfc Group - HPE XP7 User Manual

8. Select an HBA
Next, click Add WWN.
Repeat this operation until all desired HBAs are added to the PFC group.
NOTE:
Select a host bus adapter from below Monitor. You cannot add HBAs from below
Non-Monitor to PFC groups.
When selecting a host bus adapter that is already contained in some PFC group from
the upper-left tree, the Add WWN button is not activated. Select a host bus adapter that
is not contained in any PFC groups.
9. Click Apply to apply the settings to the storage system.
Related topics
"WWN tab of the Performance Control main window" (page 230)

Deleting an HBA from a PFC group

Prerequisites
Required role: Storage Administrator (System Resource Management)
You must enable the Remote Web Console secondary window. For details, see the XP7
Remote Web Console User Guide.
Procedure
1. Open the Performance Control window.
In Command View Advanced Edition:
1. On the Resources tab, expand the Storage Systems tree, right-click the target storage
system, and then select Other Functions.
2. In the displayed window, select Actions > Port/Host Group > Authentication.
3. In the next displayed window, select Go > Performance Manager > Performance
Control.
In Remote Web Console:
1. Click Reports > Performance Monitor > Performance Control to open the
Performance Control window.
2. Click
3. In the Performance Control window, click Performance Control. The Performance Control
main window appears.
4. Select the WWN tab.
from the upper-left tree and select a PFC group from the lower-left tree.
to change to Modify mode.
Working with PFC groups 133