HPE XP7 User Manual page 75

All the monitoring items are stored in short range. Therefore, you can use the shortrange
subcommand whichever operand you specify to the group subcommand. If you run Export Tool
without specifying the shortrange subcommand, the data stored in the whole monitoring term
will be exported.
The login subcommand must run before the shortrange subcommand runs.
Syntax
shortrange [[yyyyMMddhhmm][{+|-}hhmm]:[yyyyMMddhhmm][{+|-}hhmm]]
Operands
The value on the left of the colon (:) specifies the starting time of the period. The value on the
right of the colon specifies the ending time of the period. Specify the term within "Short Range
From XXX To XXX" which is output by the show subcommand.
If no value is specified on the left of the colon, the starting time for collecting monitoring data is
assumed. If no value is specified on the right of the colon, the ending time for collecting monitoring
data is assumed. The starting and ending times for collecting monitoring data are displayed in
the Monitoring Term area in the Monitor Performance window.
Figure 2 Starting and Ending Time for Collecting Monitoring Data
Operand Description
yyyyMMdd indicates the year, the month, and the day. hhmm indicates the hour and the minute.
yyyyMMddhhmm
If yyyyMMddhhmm is omitted on the left of the colon, the starting time for collecting monitoring
data is assumed. If yyyyMMddhhmm is omitted on the right of the colon, the ending time for
collecting monitoring data is assumed.
To save monitoring data up to the sampling end time, omit yyyyMMddhhmm on the right of the
colon. If you specify yyyyMMddhhmm on the right of the colon, specify date and time at least
30 minutes earlier than the current time. Otherwise, an Out of range error may occur.
Adds time (hhmm) to yyyyMMddhhmm if yyyyMMddhhmm is specified. For example,
+hhmm
201306230000+0130 indicates June 23, 2013. 01:30.
Adds time to the starting time for collecting monitoring data, if yyyyMMddhhmm is omitted.
Subtracts time (hhmm) from yyyyMMddhhmm if yyyyMMddhhmm is specified. For example,
-hhmm
201306230000-0130 indicates June 22, 2013. 22:30.
Subtracts time from the ending time for collecting monitoring data, if yyyyMMddhhmm is omitted.
If the last two digits of the time on the left or right of the colon (:) are not a multiple of the
sampling interval, the time will automatically be changed so that the last two digits is a multiple
of the sampling interval. If this change occurs to the time on the left of the colon, the time will
Export Tool command reference 75