HPE XP7 User Manual page 160

Summary information
Item
Monitoring Switch
Sample Interval
Number of Monitored CUs
Number of Monitored LDEVs
Number of Monitored WWNs
Monitored CUs tab
Use this tab to view information about the CUs that are currently being monitored.
Item
CU
Number of LDEVs
Edit CU Monitor Mode
View CU Matrix
Export
Monitored WWNs tab
Use this tab to view information about the WWNs that are currently being monitored.
Item
Port ID
HBA WWN
160 Performance Monitor GUI reference
Description
Current monitoring status:
Enabled: Performance Monitor is monitoring the storage system.
Disabled: The storage system is not being monitored.
Current sampling interval, from 1 to 15 minutes, for which statistics are collected
during short-range monitoring.
This value is available when Enabled is selected in the Monitoring Switch field.
If Disabled is selected, a hyphen appears.
Number, from 0 to 255, of CUs currently being monitored.
Number, from 0 to 65280, of LDEVs currently being monitored.
Number, from 0 to 2048, of WWNs currently being monitored.
Description
Number of monitored CUs.
Number of LDEVs included in the monitored CUs.
Click to open the Edit CU Monitor Mode window, where you can change
the monitoring status.
Click to open the View CU Matrix window, where you can view following
monitoring statuses of CUs.
CU which is being monitored
CU which is scheduled to be monitored
CU which is scheduled to be released from monitoring
Displays the window for outputting table information.
Description
Name of the port of the monitored WWN.
Host bus adapter ID of the monitored WWN.