Selection of monitoring objects
Select the desired monitoring objects in the Performance Objects field.
Item on left side of Object
field
Mainframe fibre port*
* Volumes that do not accept I/O from the host, such as pool-VOLs, are not monitored.
Connected time
Function
Connected time shows the time (in milliseconds) obtained by subtracting the CMR delay time
and the disconnected time from the response time.
Storing period
Short-Range can be specified.
Selection of monitoring objects
Select the desired monitoring objects in the Performance Objects field.
Item on left side of Object
field
Mainframe fibre port*
* Volumes that do not accept I/O from the host, such as pool-VOLs, are not monitored.
HTP port open exchanges
Function
HTP port open exchanges shows the number of open exchanges for the monitoring object port.
The number of open exchanges is the average number of active I/O accesses at the monitoring
object port.
Storing period
Short-Range can be specified.
Selection of monitoring objects
Select the desired monitoring objects in the Performance Objects field.
Item on left side of
Object field
Mainframe fibre port*
* Volumes that do not accept I/O from the host, such as pool-VOLs, are not monitored.
Item on right side of
Object field
None
Item on right side of
Object field
None
Item on right side of
Item on left side of Monitor
Object field
Data field
None
HTP Port Open Exchanges
(count/sec)
Item on left side of
Monitor Data field
Disconnected Time (ms)
Item on left side of
Monitor Data field
Connected Time (ms)
Item on right side of
Monitor Data field
None
Item on right side of
Monitor Data field
None
Item on right side of
Monitor Data field
None
Connected time
41