Selecting Cus To Monitor; Confirming The Status Of Cus To Monitor - HPE XP7 User Manual

Related topics
"Edit CU Monitor Mode wizard" (page 176)

Selecting CUs to monitor

Prerequisites
Required role: Storage Administrator (Performance Management)
Procedure
1. Open the Performance Monitor window.
In Command View Advanced Edition:
1. On the Resources tab, expand the Storage Systems tree.
2. Right-click the target storage system, and then select Performance Monitor.
In Remote Web Console:
1. Select Analytics in Explorer, and select Performance Monitor in the tree to open the
Performance Monitor window.
2. Open the Monitored CUs tab.
3. On the Monitored CUs tab click Edit CU Monitor Mode to open the Edit CU Monitor Mode
window.
4. Click Select by Parity Groups in the Unmonitored CUs field.
The Select by Parity Groups window opens. The available parity group IDs and number
of CUs are displayed.
5. Select the parity group ID from the list and click Detail.
The Parity Group Properties window opens. The CUs and the number of LDEVs are
displayed.
6. Confirm the properties of the parity group and click Close.
The Select by Parity Groups window opens.
7. Select the parity group to be the monitoring target in the Select by Parity Groups window
and click OK.
CUs in the parity group are selected in the Unmonitored CUs field. For information about
monitoring these CUs, see
Related topics
"Select by Parity Groups window" (page 181)
"Parity Group Properties window" (page 182)
"Adding and removing CUs to monitor" (page 20)

Confirming the status of CUs to monitor

Prerequisites
Required role: Storage Administrator (Performance Management)
Procedure
To view the monitoring status of CUs:
22 Performance Monitor operations
"Adding and removing CUs to monitor" (page 20).