S5-95U – Addressing, Accessing The Distributed I/O And Diagnostics With Step 5 - Siemens SIMATIC S5 Manual

S5-95U – addressing, accessing the
distributed I/O and diagnostics with
STEP 5
In this chapter
IM 308-C as DP
master
Goal
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
This chapter contains information on:
Section
10.1 Address areas and options for addressing
10.2 Accessing the distributed I/O
10.3 Diagnostics in the STEP 5 application program of the S5-95U
10.4 Monomaster and multimaster modes with S5-95U as DP master
If you have an IM 308-C as DP master, skip Chapter 10 and read Chapter 9
instead.
After reading this chapter, you will be in possession of all the information
you need in order to write the STEP 5 application program.
Topic
10
Page
10-2
10-3
10-4
10-11
10-1