Creating A New Master System - Siemens SIMATIC S5 Manual

Parameterizing, saving and documenting the configuration with COM ET 200 Windows
8.2.5

Creating a new master system

Definition Each DP master plus the DP slaves assigned to it constitutes a master system.
You have to create a new master system if you have at least two DP masters
connected to a physical bus.
If you parameterize a DP slave that can also be a DP master, COM ET 200
Windows automatically creates a new master system for this DP slave (e.g.
the IM 308-C/DP slave).
Creating a new To create a new master system:
master system
1. Select Configure
2. Select the station number for the DP master and confirm by pressing the
File
Figure 8-2
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
New master system.
"OK" button.
Result: A new field appears containing the DP master you just created.
You can now proceed in the same way as with the first master system and
assemble your new system by dragging and dropping the icons.
Edit Configure
Å Å
Overview master systems – NONAME.ET2
Mas
Master system: station number 1
Mas
INT-SLA ET 200B
Master system: station number 3
Bus designation: Bus
Host designation: S5-135U host system 1
Bus designation: PROFIBUS-DP
Station type: IM 308-C
Host designation: S5-135U host system 2
Station number: 1
Station designation: Master system 1 Station type: IM 308-C
Station number: 3
Station designation: Master system 3
Creating a new master system
COM ET 200
Documentation Service Window ?
ET 200C ET 200U DP
I: 0% O: 0%
Slaves
ET 200
DP NORM
SIMATIC
DRIVES
AS-I
OTHERS
Offline
8-17
8