S5-95U – Starting Et 200 - Siemens SIMATIC S5 Manual

S5-95U – starting ET 200
In this chapter
IM 308-C as DP
master
Goal
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
This chapter contains all you need to know about startup, shutdown and
failure of the ET 200 distributed I/O system when the S5-95U programmable
controllers are in use as DP masters.
Section
12.1 Starting and operating ET 200
12.2 S5-95U power-up on the bus
12.3 Response of the ET 200 distributed I/O system
12.4 Shutting down ET 200
12.5 Reaction of the S5-95U to failure
If you use the IM 308-C as DP master, skip Chapter 12 and read Chapter 11
instead.
After reading this chapter, you will have all the information you need to start
up the ET 200 distributed I/O system with S5-95U as DP masters.
Topic
12
Page
12-2
12-3
12-5
12-11
12-12
12-1