Siemens SIMATIC S5 Manual page 241

Access commands for the S5-115U,
S5-135U and S5-155U programmable
controllers
In this chapter
Goal
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
This chapter details the various access commands. The commands are listed
separately for each programmable controller and cover:
linear addressing
P-page addressing and
Q-page addressing
Section
B.1 Access commands for the CPUs 941 to 943 (S5-115U)
B.2 Access commands for the CPU 944
B.3 Access commands for the CPU 945
B.4 Access commands for the S5-135U
B.5 Access commands for the S5-155U
B.6 Rules for direct access to the distributed I/O
This is a ready-reference chapter. It tells you which access commands are
available for which CPUs and what you must bear in mind with regard to the
individual commands.
Topic
B
Page
B-2
B-4
B-6
B-8
B-10
B-12
B-1