Switching Off Et 200 - Siemens SIMATIC S5 Manual

12.4 Switching off ET 200

Switching off The procedure for shutting down the ET 200 distributed I/O system is always
ET 200
as follows:
1. SET the STOP/RUN switch of the S5-95U with DP master interface to
2. Set the ON/OFF switch on the S5-95U to "O".
3. Switch off the power supply of the S5-95U.
4. Switch off the power supply to the DP slaves and
5. Set the STOP/RUN switch on each DP slave (if fitted) to STOP.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
STOP.
S5-95U – starting ET 200
12-11
12