Siemens SIMATIC S5 Manual page 4

Introduction
Target group
How this manual
differs from the
predecessors
Other requisite
manuals
iv
This manual is intended for users wishing to plan, set up or operate the
ET 200 distributed I/O system. Readers should have practical experience of
or be familiar with the use of the S5-95U, S5-115U, S5-135U or S5-155U
programmable controllers.
This manual is an update describing a number of new features:
a version of the S5-95U can be operated as DP master
the IM 308-C can be operated as DP slave and as DP master
COM ET 200 Windows V 2.0 can be used to configure:
– the ET 200M distributed I/O station
– the ET 200L distributed I/O station
– the DP/AS-I Link
– other DP masters (by means of type files for DP masters)
You will find information in the S5-95U with DP–master interface and all
other versions of the S5-95U in the system manual S5-90U/S5-95U Pro-
grammable Controller. At various points in this manual, you will find
references to the system manual S5-90U/S5-95U Programmable Controller.
The slaves are not described in this manual. Other manuals dealing with
ET 200 are listed in the table below. You will find the corresponding order
numbers in Appendix F.
Manual
SINEC L2 DP
Interface of the S5-95U
Programmable
Controller
ET 200B Distributed
I/O Station
ET 200C Distributed
I/O Station
ET 200M Distributed
I/O Station
ET 200U Distributed
I/O Station
Handheld ET 200
SINEC L2/L2FO
Network Components
Contents
Configuring and commissioning the S5-95U
programmable controller with COM ET 200
(COM ET 200 V 4.x or earlier)
Structure of the ET 200B
Configuring and commissioning with
COM ET 200 (COM ET 200 V 4.x or earlier)
Structure of the ET 200C
Configuring and commissioning with
COM ET 200 (COM ET 200 V 4.x or earlier)
Structure of the ET 200M
Structure of the ET 200U
Configuring and commissioning with
COM ET 200 (COM ET 200 V 4.x or earlier)
Testing and commissioning slaves
Description of the fiber-optic components
Description of repeaters with order numbers
6GK1 510 ...
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a