1.4 Dp Slaves In The Et 200 Distributed I/O System - Siemens SIMATIC S5 Manual

1.4 DP slaves in the ET 200 distributed I/O system

Overview The following can be used as DP slaves in the distributed I/O system:
ET 200B The ET 200B is a small, compact I/O station. It is a slimline module and its
degree of protection is IP 20.
The ET 200B is particularly suitable for applications requiring a limited
number of inputs/outputs or where space is at a premium.
The ET 200B distributed I/O station consists of the terminal block (TB) for
the inhouse wiring and the electronics block (EB). The ET 200B connects to
the SINEC L2 DP field bus by means of bus connectors.
ET 200C
The ET 200C is a small, compact I/O station. The degree of protection is
IP 66/67.
On account of its sturdy design, the ET 200C is eminently suitable for use in
harsh industrial environments.
The ET 200C distributed I/O station consists of a sturdy metal housing with
integrated inputs/outputs and the interface for the SINEC L2 DP field bus.
ET 200M The ET 200M is a slave interface for the modules of the S7-300 line.
The ET 200M is eminently suitable for applications requiring a large number
of locally installed inputs/outputs or modules from the S7-300 range.
The ET 200M consists of the IM 153 slave interface, the power supply unit
and up to 8 modules from the S7-300 range.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
ET 200B
ET 200C
ET 200M
ET 200U
S5-95U with DP slave interface
IM 308-C as DP slave
DP/AS-I Link
Siemens or other-vendor field devices
System overview
1-11
1