Parameterizing An Et 200 Distributed I/O System With Com Et 200 Windows - Siemens SIMATIC S5 Manual

Parameterizing, saving and documenting the configuration with COM ET 200 Windows
8.2 Parameterizing an ET 200 distributed I/O system with
COM ET 200 Windows
In this section
Section 8.1 contains information on:
Starting point
If you have opened a new program file and entered the parameter settings in
the Master host selection dialog box, COM ET 200 Windows has already
created a window for the new master system (see Section 8.1), and the DP
master is depicted in this window as an icon.
It is advisable to set the bus, host and master parameters before setting the
slave parameters, because otherwise it is not easy to change certain settings.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
Section
8.2.1 Entering bus parameters
8.2.2 Entering host parameters
8.2.3 Entering master parameters
8.2.4 Entering slave parameters
8.2.5 Creating a new master system
8.2.6 Configuring IM 308-C as DP slave
8.2.7 Assigning shared-input masters (IM 308-C only)
8.2.8 Making provision for other-vendor masters
8.2.9 Assigning DP slaves to groups
Topic Page
8-7
8-9
8-11
8-14
8-17
8-18
8-19
8
8-20
8-21
8-5