Siemens SIMATIC S5 Manual page 108

7.2 Starting COM ET 200 Windows
Making a backup Before you install COM ET 200 Windows, you should use MS-DOS or the
copy
File Manager under MS-Windows to create a backup copy of the system
disks:
Thereafter, you use only the backup copy.
Installing To install COM ET 200 Windows:
COM ET 200
1. Insert the first disk of the COM ET 200 Windows set in a disk drive, e.g.
Windows
2. Start File Manager under MS-Windows.
3. Log on to the COM ET 200 Windows disk and select the
4. Under "Options", uncheck the program components that you do not
5. Check that the pointer to the STEP\S7BIN directory has been written cor-
6. Reboot your programmer or PC.
7. If you intend using the memory card functions, make sure that the
Starting To start COM ET 200 Windows:
COM ET 200
1. Select the "COM ET 200" group in the Program Manager, and
Windows
2. double-click on the icon for COM ET 200 Windows.
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
drive A.
"INSTALL.EXE" command.
Result: The COM ET 200 Windows installation program is started.
require and confirm your selection.
Result: COM ET 200 Windows is installed on your PC or programmer.
rectly into your AUTOEXEC.BAT. If the entry is not correct, add the fol-
lowing line to your AUTOEXEC.BAT:
path = [drive]:\STEP7\S7BIN ;
e.g. for drive C:
path = C:\STEP7\S7BIN
memory card driver is loaded when MS-WINDOWS starts
(WINSTART.BAT).
Starting COM ET 200 Windows
7
7-3