Im 308-C – Starting Et 200 - Siemens SIMATIC S5 Manual

IM 308-C – starting ET 200
In this chapter
S5-95U as DP
master
Goal
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
This chapter contains all you need to know about startup, shutdown and fail-
ure of the ET 200 distributed I/O system when the IM 308-C master inter-
faces are in use.
Section
11.1 Starting and operating ET 200
11.2 Response of the ET 200 distributed I/O system
11.3 Shutting down ET 200 and reaction to power failure
If you use an S5-95U as DP master, skip Chapter 11 and proceed to Chapter
12.
After reading this chapter, you will have all the information you need to start
up the ET 200 distributed I/O system with IM 308-C master interfaces as DP
masters.
Topic
11
Page
11-2
11-4
11-15
11-1