Entering Bus Parameters; Example Of The "Bus Parameters" Dialog Box; Example Of The "Host Parameters" Dialog Box - Siemens SIMATIC S5 Manual

Entering bus To enter the parameters for the bus:
parameters
1. In the application window, double-click on "Bus designation".
Figure 7-6
2. Confirm the baud rate of 1500 kbaud and the "PROFIBUS-DP" bus
Entering host
To enter the parameters for the host:
parameters
1. In the application window, double-click on "Host designation".
Figure 7-7
2. Make your entries as appropriate and confirm by pressing "OK".
ET 200 Distributed I/O System
EWA 4NEB 780 6000-02a
Result: The "Bus parameters" dialog box is opened.
Bus parameters
Bus example for parameterization
Bus designation:
Parameters
Bus profile: PROFIBUS-DP
Repeater on bus
OK Cancel

Example of the "Bus parameters" dialog box

profile by pressing the "OK" button.
Result: The bus parameters you entered are saved and you are returned to
the application window.
Result: The "Host parameters" dialog box is opened.
Host parameters
Host designation: Host system <1>
Host type: S5-115U / CPU 945
Power-up delay: 20

Example of the "Host parameters" dialog box

Result: The host parameters you entered are saved and you are returned
to the application window.
Starting COM ET 200 Windows
Baud rate: 1500.0
Help Set parameters ...
Cancel
Host type
[ s]
Reserv. I ...
Reserv. A. ...
kbaud
7
OK
Help
7-9