Totalizer; C.3 Totalizer - Siemens SITRANS FC430 Operating Instructions Manual

Default settings

C.3 Totalizer

HMI menu ID Parameter
2.2.7.9 Fraction Adjustment
2.2.7.9.1 Adjustment Factor
2.2.7.9.2 Adjustment Offset
: See Sensor dimension dependent default settings (Page 373)
1)
C.3

Totalizer

Table C- 9 Totalizer 1
HMI menu ID Parameter
2.3.1.1 Process Value
2.3.1.2 Unit
1)
2.3.1.2 Unit
2)
2.3.1.2 Unit
3)
2.3.1.3 Direction
2.3.1.4 Fail Safe Mode
2.3.1.5 Upper Limit Alarm
1)
270
Description
Enter the displayed fraction flow
adjustment factor.
Enter the displayed fraction flow
adjustment offset.
Description
Select process value for totaliza-
tion.
Select unit for displayed Totaliz-
er 1. Unit is not applied at com-
munication interface.
Select unit for displayed Totaliz-
er 1. Unit is not applied at com-
munication interface.
Select unit for displayed Totaliz-
er 1. Unit is not applied at com-
munication interface.
Select totalizing direction.
Select reaction of the totalizer
function in case of unreliable
process flow value.
Set upper limit alarm. Alarm is
displayed if totalizer 1 value is
above the limit.
Default value Value range
[unit]
1
0
Default value Value range
[unit]
Massflow
Massflow
•
Volu-
•
meflow
Corrected
•
Volu-
meflow
Fraction A
•
Fraction B
•
kg g, kg, t, lb,
STon, oz, T
L L, hL, m³,
Ugal, BL, BB,
BO, in³, ft³,
yd³, gal, bush
NL NL, Nm³, SL,
Sft³, Sm³
Positive
Balanced
•
Positive
•
Negative
•
Hold
•
Run
Run
•
Hold
•
Memory
•
[kg]
Operating Instructions, 05/2015, A5E03361511-AF
Access level
Expert
Expert
Access level
User
User
User
User
User
User
User
FC430 with HART