Siemens SITRANS FC430 Operating Instructions Manual page 101

Figure 6-9
Step 6 - I/O configuration
Configure the current output (channel 1). The process value is selected as PV in step 4
"Mapping of variables".
Configure channels 2, 3 and 4, if ordered. For each channel: Select the "Operation Mode"
and click on the button below for detailed configuration.
Figure 6-10
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
Filter setting selection
Quick start step 6
Commissioning
6.4 Commissioning with PDM
99