Menu Item 2.1: Basic Settings - Siemens SITRANS FC430 Operating Instructions Manual

HMI menu structure
A.2 Menu item 2.1: Basic Settings
Level 1
No. Name
3 Maintenance & Diagnostics
4 Communication
5 Security
6 Language
A.2

Menu item 2.1: Basic Settings

Table A- 2 Basic settings
Level 3
No. Name
2.1.1 Flow Direction
2.1.2 Process Noise Damping
232
Level 2
No. Name
2.6 Zero Point Adjustment
2.7 Safe Operation
2.8 Display
3.1 Identification
3.2 Alarms
3.3 Maintenance
3.4 Diagnostics
3.5 Characteristics
3.6 SensorFlash
3.7 Simulate
3.8 Audit Trail
3.9 Aerated Flow
3.10 Self Test
4.1 Polling Address (SW)
4.2 Polling Address (HW)
4.3 TAG
4.4 HART Device Type
4.5 HART Revision
4.6 Mapping of Variables
4.7 HART Units
5.1 Access Management
Level 4
No. Name
More information
Menu item 2.6: Zero Point Adjustment
(Page 245)
Menu item 2.7: Safe Operation
(Page 245)
Menu item 2.8: Display (Page 246)
Menu item 3.1: Identification
(Page 248)
Menu item 3.2: Alarms (Page 249)
Menu item 3.3: Maintenance
(Page 250)
Menu item 3.4: Diagnostics (Page 251)
Menu item 3.5: Characteristics
(Page 251)
Menu item 3.6: SensorFlash
(Page 252)
Menu item 3.7: Simulate (Page 252)
Menu item 3.8: Audit Trail (Page 254)
Menu item 3.9: Aerated Flow
(Page 254)
Menu item 3.10: Self Test (Page 255)
Menu item 4.6: Mapping of Variables
(Page 255)
Menu item 4.7: HART units (Page 255)
Menu item 5.1: Access Management
(Page 256)
Level 5
No. Name
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART