Pulsating Flow Wizard (Menu Item 1.6) - Siemens SITRANS FC430 Operating Instructions Manual

Coriolis flowmeters with hart

Hide thumbs Also See for SITRANS FC430:

Table of Contents

Commissioning

6.3 Commissioning via HMI

Pulsating Flow wizard (menu item 1.6)

The Pulsating Flow wizard will guide you through configuration of essential parameters for

applications with pulsating flow. As default the Totalizer will be set to Balanced, the Process

Noise Damping is set to 4 and the Low Flow Cut-Off value will be raised.

Default Values

Options/Description

Select whether or not to use the default values

Configure totalizer direction

Operating Instructions, 05/2015, A5E03361511-AF

FC430 with HART