Default settings
C.5 Dosing
HMI menu ID
Parameter
2.5.9.4
Decimal Places
2.5.9.4
Decimal Places
2.5.9.5
Calibration
2.5.9.5.2
Fixed Compensation
2.5.9.5.2
Fixed Compensation
2.5.9.5.2
Fixed Compensation
2.5.9.6
Valve Control
2.5.9.6.1
Stage Setup Format
2.5.9.6.2
Stage 1 Primary Open
2.5.9.6.3
Stage 1 Primary Close
326
Description
Define the decimal point for the
process value displayed in the
Local User Interface.
Define the decimal point for the
process value displayed in the
Local User Interface.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for
application delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for
application delays in closing the
valves.
Define the fixed pre-stop value.
The value is subtracted from
"Amount" to compensate for
application delays in closing the
valves.
Specify if valve control parame-
ters are defined as absolute or
relative values (% of dosing
amount).
Define the dosing amount value
to open the primary valve. The
value is in % of defined dosing
amount.
Define the dosing amount value
to close the primary valve. The
value is in % of defined dosing
amount.
Default value
Value range
[unit]
2
0
•
1
•
2
•
3
•
4
•
5
•
6
•
2
0
•
1
•
2
•
3
•
4
•
5
•
6
•
[kg]
[m
]
3
[normal m
]
3
Relative
Relative
•
Absolute
•
0
0.0 to 100.0
[%]
80
0.0 to 100.0
[%]
Operating Instructions, 05/2015, A5E03361511-AF
Access level
User
User
User
User
User
User
User
User
FC430 with HART