Siemens SITRANS FC430 Operating Instructions Manual page 274

Default settings
C.3 Totalizer
Table C- 10 Totalizer 2
HMI menu ID Parameter
2.3.2.1 Process Value
2.3.2.2 Unit
1)
2.3.2.2 Unit
2)
2.3.2.2 Unit
3)
2.3.2.3 Direction
2.3.2.4 Fail Safe Mode
2.3.2.5 Upper Limit Alarm
1)
2.3.2.6 Upper Limit Warning
1)
2.3.2.7 Lower Limit Warning
1)
2.3.2.8 Lower Limit Alarm
1)
2.3.2.9 Alarm Hysteresis
1)
2.3.2.5 Upper Limit Alarm
2)
272
Description
Select process value for totali-
zation.
Select unit for displayed To-
talizer 2. Unit is not applied at
communication interface.
Select unit for displayed To-
talizer 2. Unit is not applied at
communication interface.
Select unit for displayed To-
talizer 2. Unit is not applied at
communication interface.
Select totalizing direction.
Select reaction of the totalizer
function in case of unreliable
process flow value.
Set upper limit alarm. Alarm is
displayed if totalizer 2 value is
above the limit.
Set upper limit warning. Waning
is displayed if totalizer 2 value
is above the limit.
Set lower limit alarm. Warning
is displayed if totalizer 2 value
is above the limit.
Set lower limit warning. Alarm is
displayed if totalizer 2 value is
above the limit.
Enter the hysteresis to avoid
unwanted rapid switching.
Set upper limit alarm. Alarm is
displayed if totalizer 2 value is
above the limit.
Default value Value range
[unit]
Massflow
Massflow
•
Volu-
•
meflow
Corrected
•
Volu-
meflow
Fraction A
•
Fraction B
•
kg g, kg, t, lb,
STon, oz, T
L L, hL, m³,
Ugal, BL, BB,
BO, in³, ft³,
yd³, gal, bush
NL NL, Nm³, SL,
Sft³, Sm³
Positive
Balanced
•
Positive
•
Negative
•
Hold
•
Run
Run
•
Hold
•
Memory
•
[kg]
[kg]
[kg]
[kg]
0
[kg]
[m ]
3
Operating Instructions, 05/2015, A5E03361511-AF
Access level
User
User
User
User
User
User
User
User
User
User
User
User
FC430 with HART