Maintenance & Diagnostics; C.9 Maintenance & Diagnostics - Siemens SITRANS FC430 Operating Instructions Manual

Default settings
C.9 Maintenance & Diagnostics
Table C- 35 Custom Units
HMI menu ID Parameter
2.8.10.1 Volumeflow Unit
2.8.10.1.1 Custom Text
2.8.10.1.2 Custom Factor
2.8.10.2 Totalizer Unit
2.8.10.2.1 Custom Text
2.8.10.2.2 Custom Factor
C.9 Maintenance & Diagnostics
Table C- 36 Identification
HMI menu ID Parameter
3.1.1 Long TAG
3.1.2 Descriptor
3.1.3 Message
3.1.4 Location
3.1.5 Startup Date
3.1.6 Manufacturer
3.1.7 Product Name
3.1.8 Version
3.1.9 System Order Number
3.1.10 Firmware Revision
356
Description
Define a name for the custom
volumeflow unit. The custom
unit can then be selected in
Volumeflow unit list.
Define a volumeflow factor for
the custom unit. The factor is
based on SI volumeflow unit
m /s
3
Define a name for the custom
volume unit. The custom unit
can then be selected in Totaliz-
er unit list.
Define a volume factor for the
custom unit. The factor is based
on SI volume unit m .
3
Description
Enter a unique TAG name for
the device (up to 32 charac-
ters).
Enter a unique description for
the measurement point (up to
16 characters).
Enter message (up to 32 char-
acters).
Enter device location (up to 32
characters).
Enter the installation date of the
device.
Device manufacturer
Also shown on the device
nameplate.
Product version. Also shown on
the device nameplate.
System order number (MLFB).
Also shown on the nameplate.
System firmware version.
Default value Value range
[unit]
--------
1.0
--------
1.0
Default value Value range
[unit]
2012-01-01
00:00
Siemens
SITRANS
FC430
Operating Instructions, 05/2015, A5E03361511-AF
Access level
User
User
User
User
Access level
User
User
User
User
User
Read only
Read only
Read only
Read only
Read only
FC430 with HART