Siemens SITRANS FC430 Operating Instructions Manual page 19

FCS400 sensor specification nameplate
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
Figure 1-4
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
Ex approvals
CE
0539
Ex
MAWP
Fluid group
Wetted material
Min. fluid temperature
Size DN
Conn.
Year of Manufacture
Cal. Factor
Qm (min)
Qm (nom)
Power Supply
Enclosure IP
Ambient Temp.
Accuracy
FCS400 specification nameplate example
Ex approval specifications for the sensor (ATEX example; for
details on all approvals refer to Certificates and approvals HART
(Page 209))
Consult the operating instructions
CE mark
Notified Body ID (ATEX example)
Ex mark, Installation in hazardous locations (Page 23)
Maximum allowable working pressures at 20 °C (68 °F) and 200
°C (392 °F) (max. temperature (TS))
Fluid group statement required by PED
Measuring tube/process connection materials
Minimum fluid temperature
Nominal size
Process connection type and size
Manufacturing year
More detailed manufacturing date information is given in the
serial number found on the identification nameplate
Calibration factor
Minimum and nominal massflows with water at 20 °C (68 °F)
Power supply (not given on the compact variant because it is
internal)
Degree of protection
Ambient temperature range
Massflow, density calibration accuracy
Introduction
1.5 Device identification
17