Parameter View - Siemens SITRANS FC430 Operating Instructions Manual

7.1.5

Parameter view

Depending upon your access level, you can edit the value of the selected parameter or read
the current value.
Numeric parameters edit view
Numeric parameters in edit view are displayed as shown here.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 7-6
Note
##### signs in display
The display is unable to show the measured value. Change the measurement unit or the
resolution.
Changing a value:
1. Select the digit to be changed by pressing
2. Use
3. Press
leftmost position to escape the view without changing the value.
Note
Ensure that the new value is within the minimum/maximum range.
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
Parameter name
Parameter item number
Maximum value
Escape without saving (frame around ESC is only shown when cursor is in left-most position)
Confirm and save (frame around OK is only shown when cursor is in right-most position)
Value to be edited
Minimum value
Help text describing the parameter function. The help text appears if no key is pressed for three
seconds.
Numeric parameter edit view
key to increase the value and
key in the rightmost position to confirm the changes, or press
and keys.
key and decrease the values.
Operating
7.1 Local display (HMI)
key in the
127