HMI menu ID
Parameter
2.3.1.6
Upper Limit Warning
1)
2.3.1.7
Lower Limit Warning
1)
2.3.1.8
Lower Limit Alarm
1)
2.3.1.9
Alarm Hysteresis
1)
2.3.1.5
Upper Limit Alarm
2)
2.3.1.6
Upper Limit Warning
2)
2.3.1.7
Lower Limit Warning
2)
2.3.1.8
Lower Limit Alarm
2)
2.3.1.9
Alarm Hysteresis
2)
2.3.1.5
Upper Limit Alarm
3)
2.3.1.6
Upper Limit Warning
3)
2.3.1.7
Lower Limit Warning
3)
2.3.1.8
Lower Limit Alarm
3)
2.3.1.9
Alarm Hysteresis
3)
2.3.1.12
Decimal Places
Process Value is set to Massflow
1)
Process Value is set to Volumeflow
2)
Process Value is set to Corrected Volumeflow
3)
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
Description
Set upper limit warning. Waning
is displayed if totalizer 1 value is
above the limit.
Set lower limit alarm. Warning is
displayed if totalizer 1 value is
above the limit.
Set lower limit warning. Alarm is
displayed if totalizer 1 value is
above the limit.
Enter the hysteresis to avoid
unwanted rapid switching.
Set upper limit alarm. Alarm is
displayed if totalizer 1 value is
above the limit.
Set upper limit warning. Waning
is displayed if totalizer 1 value is
above the limit.
Set lower limit alarm. Warning is
displayed if totalizer 1 value is
above the limit.
Set lower limit warning. Alarm is
displayed if totalizer 1 value is
above the limit.
Enter the hysteresis to avoid
unwanted rapid switching.
Set upper limit alarm. Alarm is
displayed if totalizer 1 value is
above the limit.
Set upper limit warning. Waning
is displayed if totalizer 1 value is
above the limit.
Set lower limit alarm. Warning is
displayed if totalizer 1 value is
above the limit.
Set lower limit warning. Alarm is
displayed if totalizer 1 value is
above the limit.
Enter the hysteresis to avoid
unwanted rapid switching.
Define the decimal point for the
1) 2) 3)
process value displayed in the
Local User Interface.
Default value
Value range
[unit]
[kg]
[kg]
[kg]
0
[kg]
[m
]
3
[m
]
3
[m
]
3
[m
]
3
0
[m
]
3
[normal m
]
3
[normal m
]
3
[normal m
]
3
[normal m
]
3
0
[normal m
]
3
2
0
•
1
•
2
•
3
•
4
•
5
•
6
•
Default settings
C.3 Totalizer
Access level
User
User
User
User
User
User
User
User
User
User
User
User
User
User
User
271