Siemens SITRANS FC430 Operating Instructions Manual page 73

Factory configu- Software configuration
ration
Signal input Start Dosing
Stop Dosing
Active
Reset Totalizer 1
Reset Totalizer 2
Reset Totalizer 3
Reset All Totalizers
Start Zero Point Adjust-
ment
Pause/Resume dosing
Force Output
Freeze Output
Signal input Start Dosing
Stop Dosing
Passive
Reset Totalizer 1
Reset Totalizer 2
Reset Totalizer 3
Reset All Totalizers
Start Zero Point Adjust-
ment
Pause/Resume dosing
Force Output
Freeze Output
Relay output Alarm Class
Alarm Item
One Stage Dosing
Two Stage Dosing
Relay output Alarm Class
Alarm Item
One Stage Dosing
Two Stage Dosing
Load
Ensure the total load connected to the output is sufficient to obtain the voltage level required
by the module.
Load [Ω]
100
200
500
1000
2000
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
5.10 Step 4b: Connecting the inputs and outputs (channels 2 to 4)
Channel 2 Channel 3,
Channel 4
X
X
X
X
Voltage (active) [V]
4.74
7.79
12.70
16.08
18.54
Normally open
Normally closed
Voltage (passive) [V]
17.95
19.73
20.98
21.43
21.66
Connecting
71