Connecting
5.10 Step 4b: Connecting the inputs and outputs (channels 2 to 4)
5. Connect wires to terminals using wiring tool.
6. Tighten cable gland.
Note
Active or passive current output is preselected at ordering.
Factory configu-
Software configuration
ration
Signal output
Current Output
Pulse Output
Active
Frequency Output
Status Output
If Status Output:
Alarm Class
Alarm Item
Primary Valve Dosing
Control
Secondary Valve Dosing
Control
Signal output
Current Output
Pulse Output
Passive
Frequency Output
Status Output
If Status Output:
Alarm Class
Alarm Item
One Stage Dosing
Two Stage Dosing
70
Active current output
⑫
IO[3] (common)
⑪
IO[3]+ (active)
Termination example for channel 3
Channel 2
Channel 3,
Channel 4
X
X
X
X
Passive current output
⑬
IO[3]- (passive)
⑫
IO[3] (common)
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART