Siemens SITRANS FC430 Operating Instructions Manual page 236

HMI menu structure
A.3 Menu item 2.2: Process Values
Level 3
No. Name
2.2.4 Flow Adjustment
2.2.5 Density
2.2.6 Fluid Temperature
2.2.7 Fraction
234
Level 4
No. Name
2.2.4.1 Adjustment Factor
2.2.5.1 Unit
2.2.5.2 Empty Tube Detection
2.2.5.3 Empty Tube Limit
2.2.5.4 Upper Limit Alarm
2.2.5.5 Upper Limit Warning
2.2.5.6 Lower Limit Warning
2.2.5.7 Lower Limit Alarm
2.2.5.8 Alarm Hysteresis
2.2.5.9 Decimal Places
2.2.5.10 Density Adjustment
2.2.6.1 Unit
2.2.6.2 Upper Limit Alarm
2.2.6.3 Upper Limit Warning
2.2.6.4 Lower Limit Warning
2.2.6.5 Lower Limit Alarm
2.2.6.6 Alarm Hysteresis
2.2.6.7 Decimal Places
2.2.7.1 Measurement Mode
2.2.7.2 Unit
2.2.7.3 Active Fraction
2.2.7.4 Fraction Name
2.2.7.5 Fraction A
2.2.7.6 Fraction B
2.2.7.7 Fraction A %
Level 5
No. Name
2.2.5.10.1 Adjustment Factor
2.2.5.10.2 Adjustment Offset
2.2.7.5.1 Fraction A Text
2.2.7.5.2 Upper Limit Alarm
2.2.7.5.3 Upper Limit Warning
2.2.7.5.4 Lower Limit Warning
2.2.7.5.5 Lower Limit Alarm
2.2.7.5.6 Alarm Hysteresis
2.2.7.5.7 Decimal Places
2.2.7.6.1 Fraction B Text
2.2.7.6.2 Upper Limit Alarm
2.2.7.6.3 Upper Limit Warning
2.2.7.6.4 Lower Limit Warning
2.2.7.6.5 Lower Limit Alarm
2.2.7.6.6 Alarm Hysteresis
2.2.7.6.7 Decimal Places
2.2.7.7.1 Upper Limit Alarm
2.2.7.7.2 Upper Limit Warning
2.2.7.7.3 Lower Limit Warning
2.2.7.7.4 Lower Limit Alarm
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART