Operating
7.1 Local display (HMI)
Three Values
①
②
③
④
⑤
⑥
Note
Bargraph
The bargraph limits are defined as the lower and upper alarm values.
1 Value and Bargraph
①
②
③
④
118
First process value
Lower Limit Alarm
Upper Limit Alarm
Bargraph
Second process value
Third process value
Process value
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
Lower Limit Alarm
The lower limit of the bar graph is defined by the lower alarm limit of the
selected process value.
Upper Limit Alarm
The upper limit of the bar graph is defined by the upper alarm limit of the
selected process value.
Bargraph
Shows "1st Process Value" in relation to its configured maximum and
minimum limits (Upper Alarm Limit and Lower Alarm Limit for the select-
ed process value).
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
The lower limit of the bar graph is defined by the lower alarm limit of
the selected process value.
The upper limit of the bar graph is defined by the upper alarm limit of
the selected process value.
Shows the first process value in relation to its configured maximum
and minimum limits (Upper Alarm Limit and Lower Alarm Limit for the
selected process value).
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
Operating Instructions, 05/2015, A5E03361511-AF
FC430 with HART