Commissioning; General Requirements; Warnings - Siemens SITRANS FC430 Operating Instructions Manual

Commissioning

6.1

General requirements

Before commissioning it must be checked that:
● The device has been installed and connected in accordance with the guidelines provided
in Installing/mounting (Page 41) and Connecting (Page 55).
● Device installed in hazardous area meets the requirements described in Installation in
hazardous locations (Page 23).
6.2

Warnings

Sensor and transmitter ordered separately
If the sensor and the transmitter are ordered separately, a "Set To Default" routine must be
performed. This can be done via SIMATIC PDM or via menu item 3.3.3 in HMI.
Dangerous high voltage
Certain parts inside the device carry dangerous high voltage. The housing must be closed
and grounded before switching on the device.
Improper handling
The sensor connected to this device can be operated with high pressure and corrosive
media. Therefore improper handling of the device can lead to serious injuries and/or
considerable material damage.
FC430 with HART
Operating Instructions, 05/2015, A5E03361511-AF
CAUTION
WARNING
WARNING
6
73