Date And Time Settings; Lan Settings - Agilent Technologies N9913A User Manual

Date and Time, Format, and Time Zone Settings
Set the local date and time, Date and Time format, and Time Zone that is shown
on the FieldFox screen. The Date and Time is also used to identify files that are
saved.
The Date and Time can also be set by synchronizing with GPS satellites. Learn
more on page 206.
NOTE
TIPS
How to set Date and Time, Date and Time Format, and Time Zone
 Press System 7
 Then
 Then
 Press the ▲|▼ arrows to highlight the row to be edited.
 Then press Edit.
 Use the ▲|▼ arrows or rotary knob to select the field to be edited.
 Use the ▲|▼ arrows or numeric keypad to edit that field.
 Press
 Press

LAN Settings

Configure the LAN settings to be used to communicate with the Data Link
Software and connect to the FieldFox for remote SCPI operation. Learn more
about Data Link at: http://na.tm.agilent.com/fieldfox/datalink_info.html.
Learn more about remote SCPI operation at:
212
Because of licensing security, the Date and Time setting is restricted as
follows:
 Can be set backward no more than 5 hours at a time.
 Can be set forward any amount of time.
 Can be set backward or forward no more than once in a day. A new day
begins at midnight.
The GPS Sync setting has the same restrictions.
There is no restriction for setting the Time Zone.
To change the Date and Time backward a significant amount, send an email to
ctd-soco_support@agilent.com.
BEFORE setting the Date and Time, be absolutely certain that the Time Zone
setting is correct.
System Configuration.
Date and Time.
or
Cancel Done
Done to exit the Date and Time settings. The readout in the upper-right
corner of the FieldFox screen will update accordingly.
when the edits are complete.
FieldFox User's Guide