Preferences; Quick Settings Table - Agilent Technologies N9913A User Manual

Preferences

FieldFox preferences are settings that survive a shutdown. When your FieldFox
is turned OFF, then back ON, these settings remain. All preference settings can
be restored to their factory defaults. Learn how on page 204
There are two ways to make FieldFox preference settings:
 From softkey selections throughout the FieldFox menu structure. Do this to
 From the Quick Settings table.

Quick Settings Table

All preferences can be set from the Quick Settings table. They are immediately
saved as Preferences when
How to view and change Preference Quick Settings
 Press System 7
 Then
 Then
 Press
 To change a setting:
 When finished changing ALL preferences, press Done. All changes are
 To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:
System Settings
temporarily try a setting, then press Save Current Settings (as preferences).
Learn how in the next section.
Preferences
Preferences
and
Next Page Previous Page
Use the ▲|▼ arrows to highlight a setting.
o
Then press Edit. The current setting changes to
o
Some settings require you to press a softkey to change the value. Otherwise,
o
use the numeric keypad, ▲|▼ arrows, or rotary knob to change the value.
When finished changing a value, press
o
immediately saved as Preferences.
Setting
Language
Battery Saver
Startup Mode
Display Settings
Audio
Date and Time
GPS
Done is pressed.
to view all settings.
Done Edit
Learn more...
on page 204
on page 205
on page 205
on page 201
on page 200
on page 212
on page 206
yellow.
203