Power Meter (Usb) Mode - Agilent Technologies N9913A User Manual

Power Meter (USB) Mode

Power Meter measurements, available with Option 302, are made with Agilent
USB power sensors. Power readings are displayed on the FieldFox screen.
In this Chapter
Supported Power Sensors .................................. 142
How to Connect the Power Sensor ................... 143
Average/Peak ....................................................... 143
Zeroing ................................................................... 143
Set Frequency ....................................................... 144
Source Control ..................................................... 144
Set Scale ................................................................ 144
Set Relative and Offset Power ........................... 146
Set Display Units ................................................. 146
Set Averaging........................................................ 147
Single/Continuous ............................................... 147
Step Detection Mode ........................................... 147
Set Limits .............................................................. 147
See Also
Frequency Offset using Power Sensor ............. 149
Supported Power Sensors
For a complete list of supported Agilent USB Power Sensors, please visit:
www.agilent.com/find/usbsensorsforfieldfox
NOTE The FieldFox does NOT support the following Agilent USB Power Sensor
features: External Triggering (Time Gated Burst Power Measurement), Power
Sweep Operation, and Frequency Sweep Operation. External Zeroing is NOT
allowed on the U2020 X-series Power Sensors.
142 FieldFox User's Guide