Spectrogram display- Overlay view- with time markers 23 seconds apart.
The following settings all contribute to the sweep time of an individual trace, and
therefore, the total elapsed time that can appear on the screen in Spectrogram
display:
Frequency Range. Learn more on page 83.
Resolution BW and Video BW. Learn more on page 92
Sweep Time (Acquisition). Learn more on page 97.
Resolution (Number of Points). Learn more on page 105.
How to select Spectrogram
Press Meas 1
Then
Then
How to modify the Spectrogram
You can change how the spectrogram is displayed relative to the data trace. This
setting affects the total number of trace records that can be displayed.
Press Meas Setup 4.
Then
Then
Then choose from the following:
124
Interference Analysis
Spectrogram
Spectrogram Settings
Spectrogram View
Displays the data trace over the spectrogram with NO graticules.
Overlay
o
Total trace records: 340.
Displays the spectrogram with NO data trace. Total trace
Full Screen
o
records: 340.
Displays the data trace above the spectrogram. Total trace records: 130.
Top
o
Bottom
Displays the data trace below the spectrogram. Total trace records:
o
130.
FieldFox User's Guide