Agilent Technologies N9913A User Manual page 223

WARNING
CAUTION
CAUTION
For the AC/DC Adapter
FOR THE
AC/DC
ADAPTER
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Safety Considerations
When performing a measurement, ensure that the right safety and performance
ratings of the instrument and accessories are used.
Do not expose the circuit or operate the instrument without its cover or while power is
being supplied.
Do not operate the instrument in any environment at risk of explosion .
The power cord and connectors shall be compatible with the connector used in the
premise electrical system. Failure to ensure adequate earth grounding by not using the
correct components may cause product damage and serious injury.
The measuring terminals on this instrument are designed to be used with external
signals described in Measurement Category I, but NOT with external signals described
in Categories.
The AC/DC adapter is a Safety Class 1 Product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be inserted in a
socket outlet provided with a protective earth contact. Any interruption of the
protective conductor inside or outside of the product is likely to make the product
dangerous. Intentional interruption is prohibited.
Use only the designated AC/DC adapter supplied with the instrument.
Use only the designated power cord supplied with the AC/DC adapter.
No operator serviceable parts inside this product. Do not perform any unauthorized
modification to the product. Return the product to Agilent Technologies or a
designated repair center for service to ensure that safety features are maintained.
Operated at an ambient temperature: 0 to 40°C; full power rating; derate linearly to
50 W at 50°C.
Maximum output rating: +15V/4.0 A.
Input rating: AC 100–250 V, 50/60Hz
Main Plug : Use a 3–pin main plug that complies with IEC 60884–1, Plugs and
Socket–Outlets for Household and Similar Purposes – Parts1: General
Requirements and country specific safety authority requirements, such as UL, SA,
BSI, VDE, CCC, SA, NZ, and PSE.
Appliance Connector: Use an appliance connector certified to IEC 60320–1/EN
60320–1 requirements
223