See Also Erase User Data; Power On - Agilent Technologies N9913A User Manual

LAN Settings
How to configure the LAN settings
The first three 'Current...' settings can NOT be edited.
 Press System 7 .
 Then
 Then LAN.
 Use the ▲|▼ arrows to select one of the following, then press Edit.
NOTE To make the LAN settings persist after power up, toggle Apply Settings to Now
then back to Power Up. You should see a message indicating that the LANconfig
file was saved.
 Press

Power ON

When the FieldFox is without a power source, this setting allows the FieldFox to
power ON as soon as a charged battery or the DC Adapter is inserted without
pressing the power button.
System Settings
System Configuration.
Hostname Change the name that can be used to address the FieldFox if
o
your server supports this feature. The default hostname is generated
automatically.
Obtain IP Choose from:
o
o DHCP - IP Address is assigned dynamically. If your server supports this
feature, the IP Address for the FieldFox is assigned each time it is started.
o Static - Set the IP Address manually. The Address remains until you
change it.
Static IP Address - Enter the IP Address – including periods - in the format
o
nnn.nnn.nnn.nnn
Static Subnet Mask - Enter the Subnet Mask – including periods - in the
o
format nnn.nnn.nnn.nnn
Static Gateway - Enter the Static Gateway – including periods - in the
o
format nnn.nnn.nnn.nnn
Apply Settings Choose from:
o
o Power Up The above settings take effect when the FieldFox is started.
o Now The above settings take effect immediately.
when finished.
Done Edit
213