Agilent Technologies N9913A User Manual page 228

FieldFox Markings
Battery Markings
228
The CSA mark is a registered trademark of CSA International.
The RCM Mark is a registered trademark of the Australian Communications
and Media Authority.
This symbol combines the following three markings:
CE indicates product compliance with all relevant European legal Directives
(if accompanied by a year, it signifies when the design was proven).
ICES indicates product compliance with the Canadian Interference-Causing
Equipment Standard (ICES–001).
ISM indicates this is an Industrial Scientific and Medical Group 1 Class B
product (CISPR 11, Clause 4)
The Korean Certification (KC) mark is required for products that are subject
to legally compulsory certification. The KC mark includes the marking's
identifier code that has up to 26 digits and follows this format: KCC-VWX-
YYY-ZZZZZZZZZZZZZ.
The Stand By symbol is used to mark a position of the instrument power
line switch.
This symbol indicates separate collection for electrical and electronic
equipment, mandated under EU law as of August 13, 2005. All electric and
electronic equipment are required to be separated from normal waste for
disposal (Reference WEEE Directive, 2002/96/EC).
Indicates the time period which no hazardous or toxic substance elements
are expected to leak or deteriorate during normal use. Forty years is the
expected useful life of the product.
CAUTION, risk of danger, refer to safety information in manual.
Dispose of properly
Hot surface - connectors get hot during extended operation, so care must
be taken when making connections and disconnections.
The CE mark shows that the product complies with all relevant European
legal Directives (if accompanied by a year, it signifies when the design
was proven).
The battery parts can be recycled. Consult local or country regulations.
Dispose of properly. Do not throw batteries away – collect as small
chemical waste.
FieldFox User's Guide