After using the keypad, select a multiplier key. Learn about multiplier
Zoom Window
When Trace Graph is selected as the measurement, a secondary Zoom Trace can
be used to view a zoomed portion of Tr 1. When Zoom Window is ON, blue
vertical posts appear on Tr 1 to indicate the current start, center, and stop times
of the zoom window. The zoom window can be scaled using the standard Scale
settings.
How to make Zoom Window settings
Press Trace 6
Then
Then choose from the following:
Scale
For Meter-style measurements, learn how to set Scale, Relative and Offset Power,
display Units, and Resolution beginning on page 144.
How to set Scale for Trace Graph measurements
Select a trace to scale using the ▲|▼ arrows.
Press Scale / Amptd
Then choose from the following methods:
Set Scale, Reference Level, and Reference Position:
158
abbreviations on page 19.
Zoom Window
ON
Opens the zoom window on the bottom half of the FieldFox screen. The
o
window includes the zoomed trace.
OFF
Closes the zoom window.
o
While monitoring the
Zoom Center
enter a value for the center time using the numeric keypad, the ▲|▼ arrows,
or the rotary knob.
While monitoring the blue vertical posts on the primary trace,
Zoom Time/div
enter a value for the zoom window span using the numeric keypad, the ▲|▼
arrows, or the rotary knob.
Press to select Tr 1. This can also be done by using the ▲|▼ arrows.
Trace 1
Select a trace before making trace settings, such as Scale.
Zoom Trace
Press to select the zoom trace.
Autoscale
Automatically adjusts the Y-axis to comfortably fit the Min and Max
amplitude of the trace on the screen.
Manually enter a scale per division to view specific areas of the trace.
Scale
o
Manually set the value of the reference line. Enter a negative
Ref Level
o
value by pressing Run/Hold (+/-) either before or after typing a value.
Manually set the position of the reference line. Values must be
Ref Position
o
between 0 (TOP line) and 10 (BOTTOM line).
T
within the blue vertical posts on Tr 1,
FieldFox User's Guide