Amplitude Markers
Amplitude markers are horizontal dotted lines that you can move to any
amplitude level on the screen. The two amplitude markers can be set
independently or used as a pair of delta markers.
Amplitude markers can be used as a visual comparison aid with the pulse
measurement traces.
How to make Amplitude Marker settings
Press Marker
Then
Then
Then choose from the following:
Then
Enter a value in dBm for the marker using the numeric keypad, the ▲|▼
Press
Then choose from the following:
Marker Search
Use Marker Search to find and move markers to locations on the Tr 1 trace.
How to Search with Markers
Activate the marker to be used for the search
Then press Mrk ->/Tools.
Then
Then
Then choose from the following:
Then choose from the following:
Target, Peak, and Minimum. Learn more about these standard features
Pulse Measurements Mode - Option 330
More
Ampl Markers
OFF
Amplitude markers are NOT displayed.
o
ON
Amplitude markers ARE displayed at their previous positions.
o
Ampl Mkr 1 or 2
arrows, or the rotary knob.
Delta AmplMkr
ON
AmplMkr 2 value is relative to AmplMkr 1. When AmplMkr 1 is moved,
o
AmplMkr 2 also moves to maintain the AmplMkr 2 value between them.
The two amplitude markers move independent of one another.
OFF
o
Marker Search
Zone Search
ON
Available ONLY when the zoom window is enabled, the search is limited
o
to the zone defined by the zoom window.
The search is performed over the entire Tr 1 trace.
OFF
o
beginning on page 179.
Select, then set a value in dB. Delta markers are created and
Rise Time
placed at the Peak and at the specified value BEFORE the Peak.
163