Pulse Measurements Mode - Option 330
Pulsed power meter measurements, available with Option 330, are made with
Agilent U2020 X-Series USB Peak Power Sensors. These sensors are capable of
detecting, measuring, and storing data from a train of pulses at the RF input.
This data is queried from the USB Power Sensor and displayed on the FieldFox
screen. You can then analyze the data using several selectable settings.
In this Chapter
Zoom Window ....................................................... 158
Scale ....................................................................... 158
Averaging .............................................................. 159
Resolution ............................................................. 160
Triggering .............................................................. 160
Marker Search ...................................................... 163
Auto Analysis ....................................................... 164
Pulse Top ............................................................... 164
Grid ........................................................................ 165
Trace Memory ....................................................... 165
NOTE
Many of the features included with the FieldFox Pulse Measurements Mode are
discussed in detail in these two documents:
Pulse Measurements Mode - Option 330
Agilent U2020 X-Series USB Peak Power Sensors Programmer's Guide.
http://cp.literature.agilent.com/litweb/pdf/U2021-90003.pdf
155